step 2Find the Chip

step 2Find the Chip

In this instructable, I am using an old, deactivated debit card. I found the RFID chip in a previous card by cutting into it randomly.
I DO NOT recommend this method if you don't know where the chip is, as you could obviously damage the chip and make it unusable.
I do not know if all cards are setup with the RFID in the same location, but if they are, my guidelines will give you a good idea where to start.

If not, I was able to see the impression of the chip on the back of the card when I looked at it from an angle in a well lit room (it appeared as a small square impression only a few millimeters across).

Make sure to mark out a guideline to cut along that goes from the bottom of the magnetic strip to the top of the imprinted card numbers. This will yield a decent size chunk of the card with the RFID in the center

step 1Get your materials

step 1Get your materials

Items needed:
- Spare credit/debit card with embedded RFID chip (if go to your bank and request a new card they will typically send you a new card w/ the same number and info).
- Scissors
- Cellphone
- Magic marker/ Sharpie

How to turn your cellphone into a credit/debit card

introHow to turn your cellphone into a credit/debit card

Easy to do mod for an extra credit/debit card with RFID chip (i.e. Paypass).

Using this method, you will be able to locate and extract the RFID chip in your spare
Paypass-capable card and place it in your cellphone. This will allow you to present your cellphone at Paypass terminals (movie theaters, McDonalds, etc..) and pay using the RFID chip.

step 3How to block a RFID tag

step 3How to block a RFID tag

Luckily RFID tag signals can easily be blocked. This means that you will have the option to use the tag whenever you want, and prevent others from being able to read it.

The signal sent out by a RFID tag is easily blocked by metal. This means that placing the RFID tag inside of a Faraday cage will prevent the information from being read.

There are already two Instructables on how to build RFID blocking containers:

RFID Secure Wallet

Make a RFID Shielding Pouch Out of Trash

Or if you would rather spend money on something you could build, head over to Think Geek for their RFID blocking wallet and RFID blocking Passport Holder .

introHow to block/kill RFID chips

introHow to block/kill RFID chips

In this Instructable I will describe different ways to block or kill RFID tags. RFID stands for Radio Frequency Identification. If you do not know about this technology yet, you should definitely start familiarizing yourself with it, because the number of different devices that utilize these types of tags is growing exponentially.

RFID chips are very similar to barcodes in the sense that a certain amount of data is contained within them, and then transmitted to a reading device which then processes and utilizes the information. The major difference is that barcodes have to be physically visible to the reading device, which is usually only able to scan them at a distance of a 12 inches or less. RFID tags, on the other hand, do not have to be visible to the reading device. They can be scanned through clothes, wallets, and even cars. The distance from which they can be read is also much greater than that of a barcode. At DEFCON an RFID tag was scanned at a distance of 69 feet, and that was back in 2005, the possible reading distance now is probably much greater than that.

There are a few different categories of RFID tags, but the most common ones, and the ones we will be dealing with in this instructable, are the "passive" type. Passive RFID chips contain no internal power supply. They contain an antenna which is able to have a current induced in it when within range of the RFID reader. The tag then uses that electricity to power the internal chip, which bounces its data back out through the antenna, where it will be picked up by the reader.

For more information on RFID tags check out the wikipedia entry.

Intermec Antenna Cell: RFID Antenna

Intermec, Inc.

With its unique, mostly metal design, the Intermec Antenna Cell is an RFID antenna specifically developed for forklift installations where shock and vibration can far exceed the specifications of antennas designed for fixed RFID reader applications. Complete with mounting hardware, Antenna Cells can be mounted with no drilling, cutting, or welding which enables fast and inexpensive installations for a single forklift or fleet deployments.

With its unique, mostly metal design, the Intermec Antenna Cell is an RFID antenna specifically developed for forklift installations where shock and vibration can far exceed the specifications of antennas designed for fixed RFID reader applications. Complete with mounting hardware, Antenna Cells can be mounted with no drilling, cutting or welding which enables fast and inexpensive installations for a single forklift or fleet deployments. Antenna Cells are available in both FCC and ETSI frequencies.

Antenna Cells leverage another new product, the Adaptable Load Backrest (ALBR), developed in partnership with Cascade Corporation, the world's leader in the design and manufacture of lift truck attachments. The Antenna Cells can be mounted into an ALBR in about a half hour, as opposed to spending a day of field engineering time, and approximately $2500 in expense, to install RFID equipment onto a forklift the "old fashioned" way.

The ALBR neatly and precisely compartmentalizes the Antenna Cells and RFID reader into areas of the load backrest that don't obstruct the operator's vision and are protected from damage. In addition, the ALBR provides built-in Antenna Cell cable routing for protection for vulnerable cables and a professional looking installation.

Antenna Cells mounted into ALBRs are flexible and configurable for quick and inexpensive reconfigurations to support changing application needs such as converting from pallet tag reading to case level reading. This modular approach enables Antenna Cells to be interchangeable for quick replacement of damaged parts lessening slow downs in a busy operation. The ALBR and Antenna Cells not only improve operator performance and safety, they also significantly reduce the time and cost of RFID forklift deployments. With the ALBR and Antenna Cells, the installation of an RFID reader and antennas no longer needs to involve labor-intensive customization of the load backrest or fork truck. Durable, reliable installations of these products should last the life of a typical forklift lease.

Antenna Cells are sold by Intermec Technologies and its distributors and partners. ALBRs are manufactured and sold by Cascade Corporation. They are built to order for specific forklift models.

RFID Criticism

As with many new technologies, people fear what they don't understand. In the case of RFID, consumers have many fears, some of which may be justified. This debate may be one of the few in which you'll find the American Civil Liberties Union and Christian Coalition on the same side.

Human chipping has seemingly higher stakes than merchandise tagging, and RFID critics are concerned that human chipping may one day become mandatory. When the company CityWatcher.com chipped two of its employees in 2006, these fears spun out of control. CityWatcher.com insisted that the employees were not forced to be chipped -- they volunteered for the microchip implants for easier access to secured vaults where confidential documents are stored. Other employees declined the implants, and their positions with the company were unaffected.

­Aside from the limitations of VeriChip scanning discussed in the last section, human chipping has profound religious and civil liberty implications for some people. Some believe that human chipping is foretelling a biblical prophecy from the Book of Revelation, interpreting the chip as the "Mark of the Beast." To others concerned with civil liberties, the chip is bringing us one step closer to an Orwellian society, in which our every action and thought will be controlled by Big Brother.

While we can choose whether or not to put RFID chips in ourselves or our pets, we have little control over tags being placed on commercial products that we buy. In the book "Spychips: How Major Corporations and Government Plan to Track Your Every Move with RFID," Katherine Albrecht and Liz McIntyre describe the most extreme implications of RFID tags. They describe how RFID tags could be used to gauge your spending habits and bank account to determine how much you should be charged for the products you buy. This may sound paranoid, but hackers have proven that some RFID tags can be tampered with, including disabling their anti-theft features and changing the price that corresponds to their product. Better encryption is needed to ensure that hackers can't pick up RFID frequencies with super-sensitive antennae.

What's more, some critics say that relying on RFID as the primary means of security could make human security checkpoints lazy and ineffective. If security guards rely solely on the RFID anti-theft devices in merchandise and RFID technology of government-issued identification to screen for criminals or terrorists, they might miss the criminal activity happening right in front of their eyes

Photo courtesy Getty ImagesThe Australian passport served as a model for the new United States e-passport.

While many consumers happily -- or obliviously -- buy merchandise tracked with RFID tags, some people are up in arms about the federal government's legislation mandating that passports be embedded with RFID microchips.
On Aug. 14, 2006, the Department of State began issuing electronic passports, or e-passports. Prompted by the terrorist attacks of Sept.11, 2001 the Department of Homeland Security (DHS) proposed the e-passport as a security measure for air travel safety, border security and more efficient customs procedures at airports. The e-passport's enhanced security features -- a chip identification number, digital signature and photograph that acts as a biometric identifier -- make the passport impossible to forge.
The e-passport will help improve security, but with so much personal information embedded in the document, there have been many concerns raised about the e-passport's potential for identity theft. Two possible forms of identity theft that could occur with e-passports are:
· Skimming happens when someone uses an RFID reader to scan data from an RFID chip without the e-passport holder's knowledge.
· Eavesdropping happens when someone reads the frequencies emitted from the RFID chip as it is scanned by an official reader.
However, the DHS insists that the e-passport is perfectly safe to use and that proper precautions have been taken to ensure user confidentiality.
· For protection against skimming, the e-passport contains a metallic anti-skimming device. This device is a radio shield inserted between the passport's cover and first page. When the e-passport is closed, it can't be scanned at all; when it's open, it can only be read by a scanner that is less than 10 centimeters away [source: Department of State].
· To guard against eavesdropping, DHS has mandated that all areas where the e-passport is scanned be thoroughly covered and enclosed so that signals cannot be picked up beyond the authorized RFID reader.
­The e-passport costs $97. While the cost to you may seem steep, the cost of installing RFID readers in airports is even more staggering. Adopting the e-passport will require gradual change, but aut­horities are already discussing what added security features and improved biometrics the next series of e-passports will have.
The debate over e-passports pales in comparison to debates over human chipping. Next, we'll learn what RFID microchips are doing in livi­ng things.

Talking Tags

When the RFID industry is able to lower the price of tags, it will lead to a ubiquitous network of smart packages that track every phase of the supply chain. Store ­shelves will be full of smart-labeled products that can be tracked from purchase to trash can. The shelves themselves will communicate wirelessly with the network. The tags will be just one component of this large product-tracking network.

The other two pieces to this network will be the readers that communicate with the tags and the Internet, which will provide communications lines for the network.

Let's look at a real-world scenario of this system:

• At the grocery store, you buy a carton of milk. The milk containers will have an RFID tag that stores the milk's expiration date and price. When you lift the milk from the shelf, the shelf may display the milk's specific expiration date, or the information could be wirelessly sent to your personal digital assistant or cell phone.
  
• As you exit the store, you pass through doors with an embedded tag reader. This reader tabulates the cost of all the items in your shopping cart and sends the grocery bill to your bank, which deducts the amount from your account. Product manufacturers know that you've bought their product, and the store's computers know exactly how many of each product need to be reordered.
  
• Once you get home, you put your milk in the refrigerator, which is also equipped with a tag reader. This smart refrigerator is capable of tracking all of the groceries stored in it. It can track the foods you use, how often you restock your refrigerator and can let you know when that milk and other foods spoil.
  
• Products are also tracked when they are thrown into a trash can or recycle bin. At this point, your refrigerator could add milk to your grocery list, or you could program the fridge to order these items automatically.
  
• Based on the products you buy, your grocery store gets to know your unique preferences. Instead of receiving generic newsletters with weekly grocery specials, you might receive one created just for you. If you have two school-age children and a puppy, your grocery store can use customer-specific marketing by sending you coupons for items like juice boxes and dog food.

In order for this system to work, each product will be given a unique product number. MIT's Auto-ID Center is working on an Electronic Product Code (EPC) identifier that could replace the UPC. Every smart label could contain 96 bits of information, including the product manufacturer, product name and a 40-bit serial number. Using this system, a smart label would communicate with a network called the Object Naming Service. This database would retrieve information about a product and then direct information to the manufacturer's computers.

The information stored on the smart labels would be written in a Product Markup Language (PML), which is based on the eXtensible Markup Language (XML). PML would allow all computers to communicate with any computer system similar to the way that Web servers read Hyper Text Markup Language (HTML), the common language used to create Web pages.

We're not at this point yet, but RFID tags are more prominent in your life than you may realize. Wal-Mart and Best Buy are just two major merchandisers that use RFID tags for stocking and marketing purposes.

Some critics find the idea of merchandisers tracking and recording purchases to be alarming. But retail isn't the only industry using RFID technology. In the next section, we'll learn how the government is putting RFID tags to use.­

How RFID Works

RFID Tags Past and Present

RFID technology has been around since 1970, but until recently, it has been too expensive to use on a large scale. Originally, RFID tags were used to track large items, like cows, railroad cars and airline luggage, that were shipped over long distances, These original tags, called inductively coupled RFID tags, were complex systems of metal coils, antennae and glass.

Inductively coupled RFID tags were powered by a magnetic field generated by the RFID reader. Electrical current has an electrical component and a magnetic component -- it is electromagnetic. Because of this, you can create a magnetic field with electricity, and you can create electrical current with a magnetic field. The name "inductively coupled" comes from this process -- the magnetic field inducts a current in the wire. You can learn more in How Electromagnets Work.

Capacitively coupled tags

were created next in an attempt to lower the technology's cost. These were meant to be disposable tags that could be applied to less expensive merchandise and made as universal as bar codes. Capacitively coupled tags used conductive carbon ink instead of metal coils to transmit data. The ink was printed on paper labels and scanned by readers. Motorola's BiStatix RFID tags were the frontrunners in this technology. They used a silicon chip that was only 3mm wide and stored 96 bits of information. This technology didn't catch on with retailers, and BiStatix was shut down in 2001 [source: RFID Journal].

Newer innovations in the RFID industry include active, semi-active, and passive RFID tags. These tags can store up to 2 kilobytes of data and are composed of a microchip, antenna, and, in the case of active and semi-passive tags, a battery. The tag's components are enclosed within plastic, silicon or sometimes glass.

At a basic level, each tag works in the same way:

• Data­ stored within an RFID tag's microchip waits to be read.
  
  
• The tag's antenna receives electromagnetic energy from an RFID reader's antenna.
  
  
• Using power from its internal battery or power harvested from the reader's electromagnetic field, the tag sends radio waves back to the reader.
  
  
• ­The reader picks up the tag's radio waves and interprets the frequencies as meaningful data.
  

Inductively coupled and capacitively coupled RFID tags aren't used as commonly today because they are expensive and bulky. In the next section, we'll learn more about active, semi-passive and passive RFID tags.

Reinventing the Bar Code

Reinventing the Bar Code

Almost everything that you buy from retailers has a UPC bar code printed on it. These bar codes help manufacturers and retailers keep track of inventory. They also give valuable ­information about the quantity of products being bought and, to some extent, by whom the products are being bought. These codes serve as product fingerprints made of machine-readable parallel bars that store binary code.

Created in the early 1970s to speed up the check out process, bar codes have a few disadvantages:

• In order to keep up with inventories, companies must scan each bar code on every box of a particular product.
  
  
• Going through the checkout line involves the same process of scanning each bar code on each item.
  
  
• Bar code is a read-only technology, meaning that it cannot send out any information.

RFID tags are an improvement over bar codes because the tags have read and write capabilities. Data stored on RFID tags can be changed, updated and locked. Some stores that have begun using RFID tags have found that the technology offers a better way to track merchandise for stocking and marketing purposes. Through RFID tags, stores can see how quickly the products leave the shelves and who's buying them.

In addition to retail merchandise, RFID tags have also been added to transportation devices like highway toll passcards and subway passes. Because of their ability to store data so efficiently, RFID tags can tabulate the cost of tolls and fares and deduct the cost electronically from the amount of money that the user places on the card. Rather than waiting to pay a toll at a tollbooth or shelling out coins at a token counter, passengers use RFID chip-embedded passes like debit cards.

But would you entrust your medical history to an RFID tag? How about your home address or your baby's safety? Let's look at two types of RFID tags and how they store and transmit data before we move past grocery store purchase­s to human lives.

How RFID Works

Long checkout lines at the grocery store are one of the biggest complaints about the shopping experience. Soon, these lines could disappear when the ubiquitous Universal Product Code (UPC) bar code is replaced by smart labels, also called radio frequency identification (RFID) tags. RFID tags are intelligent bar codes that can talk to a networked system to track every product that you put in your shopping cart.

Imagine going to the grocery store, filling up your cart and walking right out the door. No longer will you have to wait as someone rings up each item in your cart one at a time. Instead, these RFID tags will communicate with an electronic reader that will detect every item in the cart and ring each up almost instantly. The reader will be connected to a large network that will send information on your products to the retailer and product manufacturers. Your bank will then be notified and the amount of the bill will be deducted from your account. No lines, no waiting.

RFID tags, a technology once limited to tracking cattle, are tracking consumer products worldwide. Many manufacturers use the tags to track the location of each product they make from the time it's made until it's pulled off the shelf and tossed in a shopping cart.

Outside the realm of retail merchandise, RFID tags are tracking vehicles, airline passengers, Alzheimer's patients and pets. Soon, they may even track your preference for chunky or creamy peanut butter. Some critics say RFID technology is becoming too much a part of our lives -- that is, if we're even aware of all the parts of our lives that it affects.

In this article, you'll learn about the types of RFID tags and how these tags can be tracked through the entire supply chain. We'll also look at the non-commercial uses of RFID tags and how the Departments of State and Homeland Security are using them. Lastly, we'll examine what some critics consider an Orwellian application of RFID tags in animals, humans and our society.

What is RFID?

Radio frequency identification (RFID) is a generic term that is used to describe a system that transmits the identity (in the form of a unique serial number) of an object or person wirelessly, using radio waves. It's grouped under the broad category of automatic identification technologies.

RFID is in use all around us. If you have ever chipped your pet with an ID tag, used EZPass through a toll booth, or paid for gas using SpeedPass, you've used RFID. In addition, RFID is increasingly used with biometric technologies for security.

Unlike ubiquitous UPC bar-code technology, RFID technology does not require contact or line of sight for communication. RFID data can be read through the human body, clothing and non-metallic materials.

Components

A basic RFID system consists of three components:

• An antenna or coil
• A transceiver (with decoder)
• A transponder (RF tag) electronically programmed with unique information

• The antenna emits radio signals to activate the tag and to read and write data to it.
• The reader emits radio waves in ranges of anywhere from one inch to 100 feet or more, depending upon its power output and the radio frequency used. When an RFID tag passes through the electromagnetic zone, it detects the reader's activation signal.
• The reader decodes the data encoded in the tag's integrated circuit (silicon chip) and the data is passed to the host computer for processing.

The purpose of an RFID system is to enable data to be transmitted by a portable device, called a tag, which is read by an RFID reader and processed according to the needs of a particular application. The data transmitted by the tag may provide identification or location information, or specifics about the product tagged, such as price, color, date of purchase, etc. RFID technology has been used by thousands of companies for a decade or more. . RFID quickly gained attention because of its ability to track moving objects. As the technology is refined, more pervasive - and invasive - uses for RFID tags are in the works.

A typical RFID tag consists of a microchip attached to a radio antenna mounted on a substrate. The chip can store as much as 2 kilobytes of data.

To retrieve the data stored on an RFID tag, you need a reader. A typical reader is a device that has one or more antennas that emit radio waves and receive signals back from the tag. The reader then passes the information in digital form to a computer system.

Current and Potential Uses of RFID

Asset Tracking
It's no surprise that asset tracking is one of the most common uses of RFID. Companies can put RFID tags on assets that are lost or stolen often, that are underutilized or that are just hard to locate at the time they are needed. Just about every type of RFID system is used for asset management. NYK Logistics, a third-party logistics provider based in Secaucus, N.J., needed to track containers at its Long Beach, Calif., distribution center. It chose a real-time locating system that uses active RFID beacons to locate container to within 10 feet.

Manufacturing
RFID has been used in manufacturing plants for more than a decade. It's used to track parts and work in process and to reduce defects, increase throughput and manage the production of different versions of the same product.

Supply Chain Management
RFID technology has been used in closed loop supply chains or to automate parts of the supply chain within a company's control for years.

As standards emerge, companies are increasingly turning to RFID to track shipments among supply chain partners.

Retailing
Retailers such as Best Buy, Metro, Target, Tesco and Wal-Mart are in the forefront of RFID adoption. These retailers are currently focused on improving supply chain efficiency and making sure product is on the shelf when customers want to buy it.

Payment Systems
RFID is all the rage in the supply chain world, but the technology is also catching on as a convenient payment mechanism. One of the most popular uses of RFID today is to pay for road tolls without stopping. These active systems have caught on in many countries, and quick service restaurants are experimenting with using the same active RFID tags to pay for meals at drive-through windows.

Security and Access Control
RFID has long been used as an electronic key to control who has access to office buildings or areas within office buildings. The first access control systems used low-frequency RFID tags. Recently, vendors have introduced 13.56 MHz systems that offer longer read range. The advantage of RFID is it is convenient (an employee can hold up a badge to unlock a door, rather than looking for a key or swiping a magnetic stripe card) and because there is no contact between the card and reader, there is less wear and tear, and therefore less maintenance.

As RFID technology evolves and becomes less expensive and more robust, it's likely that companies and RFID vendors will develop many new applications to solve common and unique business problems.

What is RFID?

Short for radio frequency identification, RFID is a dedicated short range communication (DSRC) technology. The term RFID is used to describe various technologies that use radio waves to automatically identify people or objects. RFID technology is similar to the bar code identification systems we see in retail stores everyday; however one big difference between RFID and bar code technology is that RFID does not rely on the line-of-sight reading that bar code scanning requires

The Technology Behind RFID
With RFID, the electromagnetic or electrostatic coupling in the RF (radio frequency) portion of the electromagnetic spectrum is used to transmit signals. An RFID system consists of an antenna and a transceiver, which read the radio frequency and transfer the information to a processing device (reader) and a transponder, or RF tag, which contains the RF circuitry and information to be transmitted. The antenna provides the means for the integrated circuit to transmit its information to the reader that converts the radio waves reflected back from the RFID tag into digital information that can then be passed on to computers that can analyze the data.

In RFID systems, the tags that hold the data are broken down into two different types. Passive tags use the radio frequency from the reader to transmit their signal. Passive tags will generally have their data permanently burned into the tag when it is made, although some can be rewritten.

Active tags are much more sophisticated and have on-board battery for power to transmit their data signal over a greater distance and power random access memory (RAM) giving them the ability to store up to 32,000 bytes of data.

RFID Frequencies
Much like tuning in to your favorite radio station, RFID tags and readers must be tuned into the same frequency to enable communications. RFID systems can use a variety of frequencies to communicate, but because radio waves work and act differently at different frequencies, a frequency for a specific RFID system is often dependant on its application. High frequency RFID systems (850 MHz to 950 MHz and 2.4 GHz to 2.5 GHz) offer transmission ranges of more than 90 feet, although wavelengths in the 2.4 GHz range are absorbed by water, which includes the human body, and therefore has limitations.

Common Uses of RFID
RFID systems can be used just about anywhere, from clothing tags to missiles to pet tags to food - anywhere that a unique identification system is needed. The tag can carry information as simple as a pet owners name and address or the cleaning instruction on a sweater to as complex as instructions on how to assemble a car.

Here are a few examples of how RFID technology is being used in everyday places:

• RFID systems are being used in some hospitals to track a patient's location, and to provide real-time tracking of the location of doctors and nurses in the hospital. In addition, the system can be used to track the whereabouts of expensive and critical equipment, and even to control access to drugs, pediatrics, and other areas of the hospital that are considered "restricted access" areas.
  
  
  
• RFID chips for animals are extremely small devices injected via syringe under skin. Under a government initiative to control rabies, all Portuguese dogs must be RFID tagged by 2007. When scanned the tag can provide information relevant to the dog's history and its owner's information.
  
  
  
• RFID in retail stores offer real-time inventory tracking that allows companies to monitor and control inventory supply at all times.
  
  
  
• The Orlando/Orange County Expressway Authority (OOCEA) is using an RFID based traffic-monitoring system, which uses roadside RFID readers to collect signals from transponders that are installed in about 1 million E-Pass and SunPass customer vehicles.

The Future of RFID
RFID is said by many in the industry to be the frontrunner technology for automatic identification and data collection. The biggest, as of yet unproven, benefit would ultimately be in the consumer goods supply chain where an RFID tag attached to a consumer product could be tracked from manufacturing to the retail store right to the consumer's home.

Many see RFID as a technology in its infancy with an untapped potential. While we may talk of its existence and the amazing ways in which this technology can be put to use, until there are more standards set within the industry and the cost of RFID technology comes down we won't see RFID systems reaching near their full potential anytime soon.